XPS/Polyboard
General Specifications
- Thermal insulation:
- XPS / polyboard 's due to low thermal conductivity, it is possible to use a thin outer walls. Thus, the interior provides wide spaces.
- Water resistance:
- XPS / polyboard, closed-pore structure is not get water inside. Therefore, the reverse roof insulation of external walls of cellars underground system and can be used safely.
- Fire safety:
- XPS / polyboard 's flame-retardant material during production to be gained from participation, and flame retardance of a possible fire, do not cause the fire to spread.
- Load-carrying ability:
- XPS / polyboard 's is very high compressive strength, min 250 kPa (25 tons / m², spread does not change the performance under load.
Physical Properties:
| Feature | Standard | Roof Floor Type | Wall Mounted |
|---|---|---|---|
| TS 11989 EN13164 | 30 | 28 | |
| Thermal conductivity (W/mK) | TS 825 EN13164 | - | - |
| Water vapor diffusion resistance | TS 825 EN13164 | 80 | 80 |
| Fire Class | TS 11989 EN13501 | E | E |
| Operating Temperature °C (maximum) | TS 11989 EN13501 | 75 | 75 |
| Compressive strength (kPa) | TS 11989 EN13164 | 300 | 300 |
| Full immersion in water absorption and long-time | TS 11989 Q13164 | WI 1 | WI 1 |
| Longitudinal expansion coefficient (mm/mK) | - | 0.07 | 0.07 |
| Capillary absorption – No | - | no | no |
*350 cm, until the desired length
Buildings XPS / polyboard Uses:
Used in lofts:
- Ridgepole above,
- Under the rafter.
Of unused roof:
- On the roof tiles
Terrace roofs (inverted roof system):
- Not walked,
- Treaded,
- Garden on the roof,
- Parking on the roof,,
Exterior walls:
- External thermal insulation system,
- Sandwich walls,
- Internal thermal insulation,
- Underground basement walls,
Trim:
- Naturally sitting on the ground floors,
- Six outdoor flooring (overhangs)
- Cold storage floors.
Ceilings:
- Heated from below the ceiling of the basement.