PE Foam Aluminium Foil Covered Pipes

It is used for reducing the heat loss gain in hot or cold lines. It is produced in the sizes indicated in the following table in accordance with the standard pipe diameters, and if the customer does not have different demand, it is produced in length of 2 meters.

 

 
  • It is used for reducing the heat loss gain in hot or cold lines. It is produced in the sizes indicated in the following table in accordance with the standard pipe diameters, and if the customer does not have different demand, it is produced in length of 2 meters.
  • It is neutral as odour and taste.
  • does not enter into chemical reaction with air.
  • its vapour permeability and moisture absorption is almost none and prevents condensation, thus it is also a good protector against corrosion.

 

Technical Characteristics:

Head conductivity coefficient(λ): (W/mK) 0,043–0,045 TS389
Flame resistance: Do not catch and carry fire.
Water absorption Sensitivity: Maximum 0,042 % of the volume after being plunged in the water and waited there for 24 hours in the room temperature.
Noise absorbing Capacity : Up to 23 dB
Tolerances: ± 1,5 % at length ± 1 mm at diameter and pipe outer thickness
Density : 25 - 40 kg/m³
 
Fig.1 Production values
 

Note: Pe foam aluminium foil covered pipes u.v. rays resistant. Available on the outside applications.